From the very beginning i immediately had problems with this game and for every potential problem i would overcome i would face the next one, then the next one, then the next one....
For the last 3/4 days i have gone from start up crashes all the way to artifacts with black squares, constant freezing, cpu's at 100% and the list goes on. I have checked every day doing all the driver updates, config files, creating the cache folder even enabling and disabling catalyst A.I(yes i have an ATI card). I know there were issues in particular with ATI/AMD cards but with the most recent 11.10 preview 2 drivers is it wishful thinking to expect decent stability with this game?
I guess the statement wishful thinking will make more sense if i say that i am using a laptop that i hoped would run rage at a decent frame rate after passing min-spec(i know this rarely means isssh) but i mean i've played all sorts of games and been able to run them good enough to have fun. e.g. TW2, deus ex:hr, crysis 2, crysis, dead island, f.e.a.r 3 etc etc. My point is i should at least be able to scraqe the barrel in graphics(low settings) for this game and get a decent fps. My specs are: intel 2.2Ghz C2D, 4gb ram, ATI mobility radeon hd 4500 series, win7 pro 64 bit.
I'm a computing student but, to be honest, i'm quite noobish when it comes to overcoming hardware specific matters such as this and i really would like some help to at least get this to a SOLID frame rate and stable. Currently, after hard work all weekend(thank you for all the helpful topics thus far community!
) i have managed to get anything from 12 - 25/26 FPS using this cfg file:note: i've put whatever lines i thought were needed from following other topics.
seta com_videoRam "512" //Memorysize of your CrafikCard (512, 1024, 2048 aso.)
seta g_showplayershadow "1" //Shadows
seta image_anisotropy "4" //Anisotropische Filter (2x or 4x, at bigger settings you could became problems)
seta image_usecompression "0" //no Texture Compression
seta image_lodbias "-1" //LoD Setting ?
seta image_useCache "1" //Makes Textures not Plopping
seta image_cacheMegs "1024" //Cache Size in MB
seta image_cacheMinK "256" //min Cache in KB
seta m_smooth "0" //better mouse speed
seta vt_pageimagesizeuniquediffuseonly2 "8192" //for better textures
seta vt_pageimagesizeuniquediffuseonly "8192" //for better textures
seta vt_pageimagesizeunique "8192" //for better textures
seta vt_maxPPF "8" //better streaming of textures (8 für dual/tripplecores CPU's, 16 if your CPU more than 3 cores like quadcore)
seta vt_lodBias "-1" //just helps
seta vt_minlod "-1" //just helps
seta vt_preload "1"
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "50"
seta vt_ignoreHighQuality "1"
seta vt_ignoreLowQuality "0"
seta vt_maxaniso "2" //maximum Anisotropische Filter Megatextur (2x or 4x)
& i have already made the id software\rage subfolders in appdata\local also.
my launch options after the "rage.exe" in the target field of my RAGE shortcut are: +cvaradd jobs_numThreads -1 +com_skipIntroVideo 1 +vt_maxPPF 8
note: I have found if i change numThreads value to 0 or 1 i get a slideshow in game. ALSO both my cores are at 100% when rage runs although my GPU does get used also.
So there you have it. Am i asking too much for this game to just work? I was highly anticipating it but considering most of you guys have killer rigs; is this just wishful thinking that i think RAGE should be playable for me when people with monster setups are having problems?
EDIT: just adding that my in game settings are AA = 2x, AF = high, TC = large, vsync = on. In catalyst triple buffering = off and vsync always on. everything else use app settings except fir mipmap detail lvl = high quality - hope this is enough info lol
Any help is much appreciated and thanks in advance.

Some people got lucky and could play it 100% stable from day one others like us mmm nope. And sadly some who had it stable until the patch from id on sat.
i will try your rageconfig and i'm assuming we have the same CCC settings then? The only thing i would like you to clear up for me is what is your performance like with this cfg file and what other things have you had to do to get it work? i.e what drivers are you using, what's your FPS like - stuttering etc and did you create that id software\rage folder for them two cache files in appdata\local? thanks again for taking the time to respond.
Any way going to test for ya Kaz be back in mm a hr lol should be a good test